Requirements for this guide:

1. An iPod Touch 4G running on iOS 5.1 (If you do not have iOS 5.1, you can download it from the PwnMyI Firmware Downloader.)

Download: Redsn0w 0.9.10b6
8304 downloads

4. Make sure you have the latest version of iTunes.

Step 1: Organizing & Extracting

Double click on Redsn0w.zip to extract it.

Step 2: Jailbreaking 

Open up the Redsn0w.app and click on “Jailbreak”.

Follow the steps on the next screen to put your iDevice into DFU mode.

On the next screen, select “Install Cydia”. Click next and wait for Redsn0w to prepare the data and apply the jailbreak. (Your iPod wil reboot again during this step.)

When these steps have finished, Redsn0w will notify you that the TETHERED jailbreak has been successful.

Step 3: Booting in Tethered Mode

Once Redsn0w has closed, it will need to be reopened to boot up the iPod. When Redsn0w has been reopened, click “Extras”.

Select “Just Boot” from the menu that appears and let Redsn0w reboot the iPod. Enjoy your jailbroken iPod Touch.

Special Thanks to Pod2G for making this untethered jailbreak possible!

Requirements for this guide:

1. An iPod Touch 3G running on iOS 5.1 (If you do not have iOS 5.1, you can download it from the PwnMyI Firmware Downloader.)

Download: Redsn0w 0.9.10b6
8304 downloads

4. Make sure you have the latest version of iTunes.

Step 1: Organizing & Extracting

Double click on Redsn0w.zip to extract it.

Step 2: Jailbreaking 

Open up the Redsn0w.app and click on “Jailbreak”.

Follow the steps on the next screen to put your iDevice into DFU mode.

On the next screen, select “Install Cydia”. Click next and wait for Redsn0w to prepare the data and apply the jailbreak. (Your iPod wil reboot again during this step.)

When these steps have finished, Redsn0w will notify you that the TETHERED jailbreak has been successful.

Step 3: Booting in Tethered Mode

Once Redsn0w has closed, it will need to be reopened to boot up the iPod. When Redsn0w has been reopened, click “Extras”.

Select “Just Boot” from the menu that appears and let Redsn0w reboot the iPod. Enjoy your jailbroken iPod Touch.

Special Thanks to Pod2G for making this untethered jailbreak possible!

Requirements for this guide:

1. An iPod Touch 4G running on iOS 5.1 (If you do not have iOS 5.1, you can download it from the PwnMyI Firmware Downloader.)

Download: Redsn0w 0.9.10b6
601 downloads

4. Make sure you have the latest version of iTunes.

Step 1: Organizing & Extracting

Double click on Redsn0w.zip to extract it.

Step 2: Jailbreaking 

Open up the Redsn0w.app and click on “Jailbreak”.

Follow the steps on the next screen to put your iDevice into DFU mode.

On the next screen, select “Install Cydia”. Click next and wait for Redsn0w to prepare the data and apply the jailbreak. (Your iPod Touch wil reboot again during this step.)

When these steps have finished, Redsn0w will notify you that the TETHERED jailbreak has been successful.

Step 3: Booting in Tethered Mode

Once Redsn0w has closed, it will need to be reopened to boot up the iPod. When Redsn0w has been reopened, click “Extras”.

Select “Just Boot” from the menu that appears and let Redsn0w reboot the iPod. Enjoy your jailbroken iPod Touch.

Special Thanks to Pod2G for making this untethered jailbreak possible!

Requirements for this guide:

1. An iPod Touch 3G running on iOS 5.1 (If you do not have iOS 5.1, you can download it from the PwnMyI Firmware Downloader.)

Download: Redsn0w 0.9.10b6
601 downloads

4. Make sure you have the latest version of iTunes.

Step 1: Organizing & Extracting

Double click on Redsn0w.zip to extract it.

Step 2: Jailbreaking 

Open up the Redsn0w.app and click on “Jailbreak”.

Follow the steps on the next screen to put your iDevice into DFU mode.

On the next screen, select “Install Cydia”. Click next and wait for Redsn0w to prepare the data and apply the jailbreak. (Your iPod Touch wil reboot again during this step.)

When these steps have finished, Redsn0w will notify you that the TETHERED jailbreak has been successful.

Step 3: Booting in Tethered Mode

Once Redsn0w has closed, it will need to be reopened to boot up the iPod. When Redsn0w has been reopened, click “Extras”.

Select “Just Boot” from the menu that appears and let Redsn0w reboot the iPod. Enjoy your jailbroken iPod Touch.

Special Thanks to Pod2G for making this untethered jailbreak possible!

Requirements for this guide:

1. An iPhone 3GS running on iOS 5.1 (If you do not have iOS 5.1, you can download it from the PwnMyI Firmware Downloader.)

Download: Redsn0w 0.9.10b6
8304 downloads

4. Make sure you have the latest version of iTunes.

Step 1: Organizing & Extracting

Double click on Redsn0w.zip to extract it.

Step 2: Jailbreaking 

Open up the Redsn0w.app and click on “Jailbreak”.

Follow the steps on the next screen to put your iDevice into DFU mode.

On the next screen, select “Install Cydia”. Click next and wait for Redsn0w to prepare the data and apply the jailbreak. (Your iPhone wil reboot again during this step.)

When these steps have finished, Redsn0w will notify you that the TETHERED jailbreak has been successful.

Step 3: Booting in Tethered Mode

Once Redsn0w has closed, it will need to be reopened to boot up the iPhone. When Redsn0w has been reopened, click “Extras”.

Select “Just Boot” from the menu that appears and let Redsn0w reboot the iPhone. Enjoy your jailbroken iPhone.

Special Thanks to Pod2G for making this untethered jailbreak possible!

Why To Check BootRom?

There are two types of BootRom in iPhone 3GS. Older iPhone 3Gs comes with Old BootRom [iBoot-359.3] while the newer units of iPhone 3GS has New BootRom [iBoot-359.3.2]. Old BootRom is vulnerable to jailbreak exploit but there’s no jailbreak exploit found in New BootRom so far. So,  it’s important to know your BootRom version prior to jailbreak.

How to Check iPhone 3GS BootRom (iBoot)

• Old BootRom: iBoot-359.3
• New BootRom: iBoot-359.3.2

Check iPhone 3GS BootRom (iBoot) in MAC OS X

Here are the steps to check bootrom (iBoot) version of iPhone 3GS in Mac OS X.

Step 1

Connect your iPhone 3GS to your computer and put it into DFU mode.

Step 2

Go to Apple Menu (Top-Left) and select About This Mac. Then hit the More Info button.

Step 3

Select the USB listed under Hardware from the left navigation pane. Then select the Apple Mobile Device (DFU Mode) from the right-top pane. (See the screenshot below)

Step 4

Then scroll down the details pane (Right-Bottom) and locate the serial number field. At the end of the serial number, there’s your bootrom like this: [iBoot-359.3]

***If you have an iPhone 3GS iBoot-359.3 >> Old bootrom.
***If you have an iPhone 3GS iBoot-359.3.2 >> New bootrom.

Check iPhone 3GS BootRom (iBoot) in WINDOWS

Here are the steps to check bootrom (iBoot) version of iPhone 3GS in Windows OS.

There are two ways to check iPhone 3GS BootRom in Windows.

• Using iDetector
• Manually

Using iDetector

Step 1

Connect your iPhone 3GS to your computer and put it into DFU mode.

Step 2

Download iDetect and run it.

Step 2

Hit the “Is My BootRom Old or New” button. It will tell you if your iPhone 3GS bootrom is Old or the new one.

***If you have an iPhone 3GS iBoot-359.3 >> Old bootrom.
***If you have an iPhone 3GS iBoot-359.3.2 >> New bootrom.

Requirements for this guide:

1. An iPhone 3GS running on iOS 5.1 (If you do not have iOS 5.1, you can download it from the PwnMyI Firmware Downloader.)

Download: Redsn0w 0.9.10b6
601 downloads

4. Make sure you have the latest version of iTunes.

Step 1: Organizing & Extracting

Double click on Redsn0w.zip to extract it.

Step 2: Jailbreaking 

Open up the Redsn0w.app and click on “Jailbreak”.

Follow the steps on the next screen to put your iDevice into DFU mode.

On the next screen, select “Install Cydia”. Click next and wait for Redsn0w to prepare the data and apply the jailbreak. (Your iPhone wil reboot again during this step.)

When these steps have finished, Redsn0w will notify you that the TETHERED jailbreak has been successful.

Step 3: Booting in Tethered Mode

Once Redsn0w has closed, it will need to be reopened to boot up the iPhone. When Redsn0w has been reopened, click “Extras”.

Select “Just Boot” from the menu that appears and let Redsn0w reboot the iPhone. Enjoy your jailbroken iPhone.

Special Thanks to Pod2G for making this untethered jailbreak possible!

Requirements for this guide:

1. An iPhone running on iOS 5.1 (If you do not have iOS 5.1, you can download it from the PwnMyI Firmware Downloader.)

Download: Redsn0w 0.9.10b6
601 downloads

4. Make sure you have the latest version of iTunes.

Step 1: Organizing & Extracting

Double click on Redsn0w.zip to extract it.

Step 2: Jailbreaking 

Open up the Redsn0w.app and click on “Jailbreak”.

Follow the steps on the next screen to put your iDevice into DFU mode.

On the next screen, select “Install Cydia”. Click next and wait for Redsn0w to prepare the data and apply the jailbreak. (Your iPhone wil reboot again during this step.)

When these steps have finished, Redsn0w will notify you that the TETHERED jailbreak has been successful.

Step 3: Booting in Tethered Mode

Once Redsn0w has closed, it will need to be reopened to boot up the iPhone. When Redsn0w has been reopened, click “Extras”.

Select “Just Boot” from the menu that appears and let Redsn0w reboot the iPhone. Enjoy your jailbroken iPhone.

Special Thanks to Pod2G for making this untethered jailbreak possible!

Requirements for this guide:

1. An iPhone running on iOS 5.1 (If you do not have iOS 5.1, you can download it from the PwnMyI Firmware Downloader.)

Download: Redsn0w 0.9.10b6
8304 downloads

4. Make sure you have the latest version of iTunes.

Step 1: Organizing & Extracting

Double click on Redsn0w.zip to extract it.

Step 2: Jailbreaking 

Open up the Redsn0w.app and click on “Jailbreak”.

Follow the steps on the next screen to put your iDevice into DFU mode.

On the next screen, select “Install Cydia”. Click next and wait for Redsn0w to prepare the data and apply the jailbreak. (Your iPhone wil reboot again during this step.)

When these steps have finished, Redsn0w will notify you that the TETHERED jailbreak has been successful.

Step 3: Booting in Tethered Mode

Once Redsn0w has closed, it will need to be reopened to boot up the iPhone. When Redsn0w has been reopened, click “Extras”.

Select “Just Boot” from the menu that appears and let Redsn0w reboot the iPhone. Enjoy your jailbroken iPhone.

Special Thanks to Pod2G for making this untethered jailbreak possible!

Requirements for this guide:

1. An iPad 2 running on iOS 5.0.1 (If you do not have iOS 5.0.1, you can download it from the PwnMyI Firmware Downloader.)

Download: Absinthe 0.4
24 downloads

3. Make sure you have the latest version of iTunes.

Step 1: Organizing & Extracting

Double click on Absinthe-win.zip to extract it.

Step 2: Installing the Jailbreak

Connect your iPad 2 to the computer via USB.

Open up the Absinthe.exe and select “Jailbreak”.

As the jailbreak is being applied, the application will go through several steps. This process will usually take between 5-10 minutes. Some of the steps the jailbreak will go through are:

• Sending Initial Data
• Waiting for Reboot
• Waiting for Device to Finish Booting
• Preparing Jailbreak Data
• Sending Payload Data

You will then be informed that the jailbreak is ‘Almost done’.

Step 3: Jailbreaking

Unlock your iPad 2 and search for the Absinthe icon. Launch the app to complete the jailbreak.

Alternative Jailbreaking Method

Launch the Settings app on your iPad and turn on VPN.

A configuration error will appear. After about a minute, your device will reboot and Cydia will be available on the homescreen.